Dr Ghada Koleilat – A Career of Breakthroughs in Advanced Materials
Solution-processed nanomaterials, such as quantum dots, are some of the most exciting and widely studied materials in nanotechnology today, but reaching this point has been no easy task for scientists. From the very start of her career, Dr Ghada Koleilat, now an Assistant Professor at Dalhousie University in Canada, has been a renowned pioneer in this field – devising innovative new solutions to some of nanotechnology’s most pressing questions. Her numerous breakthroughs have brought about some profound new ways of thinking in one of the most rapidly developing energy generation technologies in the modern world: solar cells.
Some of the most ubiquitous elements of today’s technological devices are materials named semiconductors, whose conductive properties fall in between those of conductors and insulators. In recent years, researchers worldwide have aimed to push the capabilities of these materials ever higher.
To date, one of their most cutting-edge developments are semiconductors scaled down to just a few atoms across – so small that the intriguing effects of quantum mechanics become relevant in governing their behaviours. Known as ‘quantum dots’, these nanoscale semiconductors, whose behaviours strongly mimic those of individual atoms, are now widely studied in the field of nanotechnology, particularly relating to how they interact with light.
When illuminated by ultraviolet light, one of the electrons in a quantum dot will jump from its insulating, or ‘valence’ band, into its conducting band. As it jumps back to the valence band, this electron will then emit a particle of light – a photon – whose colour directly depends on the difference in energy between the two bands.
Yet despite the numerous advantages of this property, many challenges remain before quantum dots can be fully exploited. For instance, when they are exposed to air, today’s quantum dots will typically break down within just a few minutes, significantly limiting their prospects for use in modern technologies.
Straight after finishing her undergraduate degree in electrical engineering, Dr Ghada Koleilat committed her research to tackling this challenge head-on. Through a graduate project at the University of Toronto, she did this by exploring the chemical processes that unfold as quantum dots are produced. Through her results, published in the journal ACS Nano in 2008, she proposed that the inconveniently short lifetimes of quantum dots stem from the use of organic molecules named ligands in their production process. These ligands bind to a central metal atom, and allow quantum dots to become evenly dispersed throughout a mixture.
Dr Koleilat needed to devise an entirely new way to process quantum dots from scratch. After becoming well acquainted with a wide array of manufacturing techniques, she succeeded in designing and creating quantum dots with far longer lifespans than had ever been achieved previously – while maintaining their even dispersion.
This technology has been licenced to the semiconductor production company, InVisage Technologies, now owned by Apple. Dr Koleilat’s advanced quantum dots are now the core of the manufacturing techniques used by the company and will soon provide a basis for a new range of phone cameras, set to enter production in the near future.
Pushing the Limits of Solar Cells
Today, perhaps the most widely explored application of quantum dots are solar cells – one of the most promising and rapidly evolving forms of renewable energy currently available. Typically, solar cells operate using the photovoltaic effect, in which photons of sunlight excite the electrons in semiconductor materials to the conducting band, where they can move freely. Once in the conduction band, these electrons can travel around a circuit towards a positively charged part of the cell, creating a flow of electricity that can be harvested.
Today, conventional solar cells require semiconductor materials that contain just the right mixtures of impurities to output as much electricity as possible. Yet through her research, Dr Koleilat shows that materials hosting evenly dispersed mixtures of quantum dots could be better suited to this task. Since the gaps between the conducting and valence bands in quantum dots are easily tuneable in the manufacturing process, they are ideal for efficiently generating electricity from sunlight. To ensure optimal performance, however, their compositions must be meticulously engineered.
Integrated Quantum Dots
Following her initial work with quantum dots, Dr Koleilat embarked on her PhD project, in which she explored the possibility of a wider usage of quantum dots in solar cell manufacture. Funded by Canada’s Natural Sciences and Engineering Research Council (NSERC), she developed and patented the world’s first solar cell in which materials containing long-lived, evenly-suspended quantum dots were used in conjunction with other semiconductor materials. Through collaboration with industries including Oerlikon Solar, she was able to integrate her quantum dots into existing silicon-based technologies, providing the ideal platform for these ‘tandem’ cells.
Through results published in Nano Letters in 2012, Dr Koleilat reported a greatly enhanced performance in tandem solar cell materials when impurities at precisely the right concentrations were introduced. Furthermore, her contribution to a study published in ACS Applied Materials in 2011 was instrumental in developing a device that converted over 3% of incoming sunlight into electricity – which was great performance for a solar cell based on quantum dots at the time. Both of these studies were widely hailed as major breakthroughs for the use of quantum dots in solar cell manufacturing, attracting praise from media groups including the National Post and MIT’s Technology Review.
At the same time as this project, Dr Koleilat worked on new techniques for integrating her tandem solar cells into realistic power supply systems, paying particular attention to the composition of their constituent electrodes – the terminals that connect the solar cell to the electric circuit.
After a design had been perfected through computer modelling, the work resulted in a two-layer electrode – the first of which had a high concentration of impurities added, and supplied a high density of free electrons to an ultra-thin second layer of titanium dioxide. When integrated into a quantum dot solar cell by another student, Dr Koleilat’s design achieved a record-breaking energy conversion efficiency of 8.5%.
In another study, published in Scientific Reports in 2013, Dr Koleilat explored the properties of quantum dots in a novel photovoltaic device design – a setup previously regarded as ineffective for realising efficient solar cells. Through her approach, however, Dr Koleilat enhanced the overall energy conversion efficiency by 30% compared with previous attempts.
Through each of these numerous and significant breakthroughs, Dr Koleilat has clearly demonstrated her prowess in developing innovative techniques for the integration of quantum dots into solar cells. Yet in her next few projects, she would demonstrate that her skills translate to an even broader range of technologies.
Sorting Carbon Nanotubes
After completing her PhD, Dr Koleilat began to explore further approaches to improving solar cell performance beyond quantum dots, through postdoctoral work at Stanford University. This time, her research focused on semiconducting carbon nanotubes – arrangements of carbon atoms wrapped into tubes just a few atoms thick.
In theory, these structures can improve energy conversion efficiency in similar ways to specialised dyes that are already widely used, and are known to significantly improve solar cell performance when placed between the layers of tandem cells. Yet to achieve the same effect with carbon nanotubes, they must be precisely sorted – no easy task for such tiny structures.
Through research published in ACS Nano in 2014, Dr Koleilat and her colleagues devised yet another new technique for optimally sorting nanotubes in this way, which enabled extremely high yields of the structures. At the same time, her experiments brought about new discoveries regarding the transport of electrons across dual layers of nanotubes, providing researchers with new insights into how performance could be boosted even further.
Improving Perovskite Crystals
Following this work, Dr Koleilat investigated yet another approach to enhancing solar cell efficiency, involving thin films of a specialised composition – named ‘perovskite’. When thin films of the material were deposited on top of existing solar cells in previous studies, researchers found that their electrical properties could be greatly enhanced. Dr Koleilat is now aiming to improve these properties even further, enabling perovskite films of only around 500 nanometres to 1 micrometre thick to be precisely deposited onto the surfaces of solar cells, to greatly enhance their performance at little cost to the manufacturer.
In her technique, reported in ACS Photonics, a thin film of perovskite is continuously blade-coated onto a moving surface. As it spreads, the perovskite film is smoothed out by a blade, to create a uniform film, creating macroscopic crystals with enhanced electrical properties. Like her previous breakthroughs, Dr Koleilat believes this blade-coating approach has the potential to transform the solar cell industry. However, several challenges remain before the technique can become widely commercialised.
Aims for the Future
Currently, the type of specialised perovskite used by Dr Koleilat quickly breaks down when exposed to air. Therefore, she now aims to find new ways to develop scalable, stable, and highly efficient devices incorporating the material, which are suitable for widespread integration into modern technologies. Having maintained a rapid pace of ground-breaking discoveries for over a decade, Dr Koleilat and the research team she now leads at Dalhousie University are in a stronger position than ever to realise these goals.
This work promises to strengthen the position of solar energy as one of the most advanced forms of electricity generation available. As renewable energy becomes an increasingly important aspect of the global energy generation mix, and the global fight against climate change gains momentum, Dr Koleilat’s discoveries come at a critical time, and may soon prove to hasten our migration away from fossil fuels.
Meet the researcher
Dr Ghada Koleilat
Department of Electrical and Computer Engineering
Halifax, Nova Scotia
Dr Ghada Koleilat completed her PhD in Electrical Engineering at the University of Toronto in 2012. Before graduating, she pioneered the use of quantum dots in solar cell manufacture, greatly improving their electrical properties. This technology is now patented and licenced to InVisage Technologies Inc. Upon completing her PhD, Dr Koleilat then embarked on her postdoctoral training at Stanford University, where she explored the potential use of carbon nanotubes in solar cells. Following this work, Dr Koleilat joined Dalhousie University as an Assistant Professor in 2016. She now leads the Koleilat Research Group at the university, which investigates the properties of advanced materials for use in advanced energy conversion technologies.
Prof. Ian Hill, Department of Physics and Atmospheric Science, Dalhousie University
Prof. Craig Bennet, Department of Physics, Acadia University
Prof. Melanie Chiu, Chemistry Department, Stony Brook University
NSERC Discovery Grant
New Frontiers in Research Fund (Exploration-stream)
Canadian Foundation for Innovation
MM Hasan, C Clegg, M Manning, A El Ghanam, C Su, M Harding, JC Bennett, IG Hill, GI Koleilat, Stable Efficient Methylammonium Lead Iodide Thin Film Photodetectors with Highly Oriented Millimeter-Sized Crystal Grains, ACS Photonics, 2020, 7, 57.
GI Koleilat, L Levina, H Shukla, SH Myrskog, S Hinds, A G Pattantyus-Abraham, EH Sargent, Efficient, stable infrared photovoltaics based on solution-cast colloidal quantum dots, ACS Nano, 2008, 2, 833.
GI Koleilat, X Wang, EH Sargent, Graded recombination layers for multijunction photovoltaics, Nano Letters, 2012, 12, 3043.
X Wang, GI Koleilat, A Fischer, J Tang, R Debnath, L Levina, E H Sargent, Enhanced open-circuit voltage in visible quantum dot photovoltaics by engineering of carrier-collecting electrodes, ACS Applied Material Interfaces, 2011, 3, 3792.
GI Koleilat, IJ Kramer, CTO Wong, SM Thon, AJ Labelle, S Hoogland, EH Sargent, Folded-Light-Path Colloidal Quantum Dot Solar Cells, Scientific Reports, 2013, 3.
GI Koleilat, X Wang, AJ Labelle, AH Ip, GH Carey, A Fischer, L Levina, L Brzozowski, EH Sargent, A donor-supply electrode (DSE) for colloidal quantum dot photovoltaics, Nano Letters, 2011, 11, 5173.
H Wang, GI Koleilat, P Liu, G Jiménez-Osés, Y-C Lai, M Vosgueritchian, Y Fang, S Park, KN Houk, Z Bao, High-Yield Sorting of Small-Diameter Carbon Nanotubes for Solar Cells and Transistors, ACS Nano, 2014, 8, 2609.
Want to republish our articles?
We encourage all formats of sharing and republishing of our articles. Whether you want to host on your website, publication or blog, we welcome this. Find out more
Creative Commons Licence
(CC BY 4.0)
This work is licensed under a Creative Commons Attribution 4.0 International License.
What does this mean?
Share: You can copy and redistribute the material in any medium or format
Adapt: You can change, and build upon the material for any purpose, even commercially.
Credit: You must give appropriate credit, provide a link to the license, and indicate if changes were made.
More articles you may like
Dr Claudine Bruck | Professor Edward Morrisey | Professor Jason Burdick – A Hydrogel with the Ability to Recover Heart Function
The human heart is a muscle, and like all types of muscles, it can be injured. In humans, heart muscle is not able to regenerate after injury, and this can lead to heart disease which develops over time, eventually leading to an untimely death. A team of researchers, Doctor Claudine Bruck (Prolifagen), Professor Edward Morrisey (Department of Medicine and Cell and Developmental Biology) and Professor Jason Burdick (Department of Bioengineering) at the University of Pennsylvania, have collaborated to develop a novel therapy to regenerate damaged heart muscle.
Dr Charles Vite – Naturally Occurring Diseases in Dogs and Cats Help to Develop Treatments for Inherited Neurological Disorders
Many inherited neurological diseases are rare but can have severe outcomes, frequently resulting in disability and even death for children. New treatment options are essential to prevent suffering and decrease mortality, but to find such treatments, these diseases need to be more closely studied. Dr Charles Vite and his team at the School of Veterinary Medicine, University of Pennsylvania, are committed to achieving these goals. By utilising animal models and unique markers for inherited neurological disease, they have already delivered promising results supporting the development of new treatment options.
Climate change is mostly the result of elevated carbon dioxide emissions. Over the past two decades, research groups have been searching for new technologies that capture carbon dioxide from the atmosphere as an effective way of reversing climate change. Dr Radu Custelcean and his colleagues at the Oak Ridge National Laboratory in the US specialise in this endeavour. The team is developing novel materials and methods that filter carbon dioxide out of the air in an energy-efficient manner.
Efforts to reform science education in the US emphasise the importance of engaging in the development of explanations of natural phenomena in students’ learning. Discussing and evaluating ideas is a vital component of this process. Thus, teaching practices that enhance student sensemaking through talk are central to improved science education; this is a marked shift from traditional teaching, where the teacher lectures about science explanations and then students do a lab to confirm what they have been told. Researchers from Florida State University and Georgia State University are investigating how teachers can be supported to develop the skills they need to adopt these instructional practices, in their research and professional development project: Learning through Collaborative Design.