A key limitation of pest control in agriculture and forestry is the ability to detect pests and diseases early enough for effective treatment. This is exacerbated in the pine forestry industry, where plantations cover vast areas and many pests remain hidden inside the trees. Pine trees killed by beetles are often discarded, causing significant economic and environmental consequences. Dr Cedric Ogden at Fort Valley State University is developing a comprehensive loblolly pine pest-management plan, using drones to detect infestations early, and salvaging damaged timber for use as a fuel source.

Early Pest Detection

Imagine looking out across a grassy lawn. It would be fairly easy to spot any problem areas that needed your intervention. But what if you were the size of an ant? It would become an exceedingly difficult task. This is the scale of the challenge faced by foresters across the globe, with commercial forest plantations spanning across millions of acres, and some trees growing up to 50 metres tall. In the state of Georgia alone, commercial forests cover over 24 million acres of land. With the scale of the area to be covered, monitoring and maintaining the health of forest plantations has traditionally been a time-consuming and labour-intensive activity.

Forestry, by necessity, is a long-term enterprise. With many foresters planting trees that they will never themselves see harvested, catching problems early is imperative to ensuring the continued economic viability of the plantations. Some of the most devastating problems arising in pine tree plantations, such as bark beetles and other insect pests, cause entire patches of trees to die. With climate change increasing the range and abundance of some of these damaging pests, developing more robust and efficient methods of managing the health of forest plantations is vital to the forestry industry.

Unmanned aerial vehicles (UAVs), more commonly referred to as ‘drones’, offer a promising technique for managing forests and cropland. By integrating cameras, drones offer a bird’s-eye view of the land, so the health of the plants can be monitored remotely and with much greater efficiency. Specialist equipment allows the collection of important health data, which provide clues to identify what pests and diseases are present, and at what scale. Drones may also be useful in precision plant health management, by allowing smaller target areas to be treated with pesticides, herbicides and water.

Dr Cedric Ogden at Fort Valley State University, Georgia, is exploring the use of drones in forestry and agriculture with the aim of developing the technology that can be used by foresters and farmers across the globe. By incorporating his experience in engineering and agricultural management, Dr Ogden adopts an interdisciplinary approach to solve complex problems. ‘Infusing research with extension and outreach allows direct impact to the community and the people that need it most,’ he explains. ‘Understanding the issues faced allows research investigations to be more meaningful.’

His current research focusses on southern pine beetle infestations in loblolly pine plantations in Georgia. Alongside his colleagues, Dr Ogden is now developing a complete management plan for this destructive insect pest, from effective monitoring using drones, to the use of infected timber (which would otherwise be discarded) as an environmentally friendly fuel source.

Benefits and Challenges

The timber industry contributes billions of dollars to the US economy, creating hundreds of thousands of jobs. Timber uses range from housing materials and furniture to wood-based fuels and pellets. Additionally, forest plantations are environmentally beneficial. ‘Forests prevent erosion, help with filtration of water, help the soil absorb water slowly, and in turn, help prevent flooding,’ explains Dr Ogden.

A well-managed plantation is a carbon sink, capturing and storing more carbon from the atmosphere than it releases. Even plantations used predominantly to provide wood fuel for burning are at least carbon neutral, with the carbon released during burning being recaptured when new trees are planted in their place. Thus, wood fuel is a renewable and eco-friendly alternative to coal or fossil fuels. This means that well-managed forest plantations can play key roles in the fight against climate change.

However, damage caused by pests and diseases can alter the delicate balance of these forest ecosystems, by altering the water and carbon cycling within the systems, and even entirely killing off patches of trees. The decomposition from dying and dead trees prematurely releases carbon back into the atmosphere. This may shift forests from carbon sinks to carbon sources, and reduce their overall benefit in slowing climate change.

‘Infusing research with extension and outreach allows direct impact to the community and the people that need it most. Understanding the issues faced allows research investigations to be more meaningful.’

Loblolly pine is one of the most important commercial tree species in the state of Georgia, but unfortunately, it is also a favourite host of the southern pine beetle. Southern pine beetles belong to the same family as weevils, but are specially adapted to bore into the wood of trees, where they feed and reproduce inside the inner bark. They have the propensity to attack healthy trees, eventually causing the tree to die. Additional stressors, such as drought, put trees at greater risk of attack, meaning infestations may become more frequent as temperatures rise in the future. As they are hidden within the tree for much of their lifecycle, these beetles pose significant challenges for early detection.

Dr Ogden has been using drones to aid the detection of southern pine beetle outbreaks in loblolly pine forests. Recently, he successfully used drone technology to develop a crop management plan for farmers in Nigeria, using the aerial imagery to map out specific areas to target. Using drones in pine plantations not only allows dying trees to be precisely located in large areas of forest, but also allows early detection by incorporating heat-sensing technology into the surveillance.

The development of the beetle within the trees causes a rise in temperature that can be detected before external signs of damage are visible, allowing infected trees to be removed before the infestation has had chance to spread. ‘Remote sensing in aerial vehicles equipped with infrared and thermal sensors will be used to scan and identify infected areas by locking in on vegetation reduction and heat spikes caused by the disease,’ explains Dr Ogden.

Infested Wood as a Fuel Source

Once beetle-infested trees have been located and removed from the plantation, the question remains of what to do with the timber. Traditionally, the infected trees have been discarded, releasing carbon into the atmosphere as the trees decompose and causing significant economic losses.

Dr Ogden is researching the suitability of wood sourced from beetle-infested pine trees for use in combustible pellets for heating systems. As a carbon neutral energy source, these wood pellets could provide an economically and environmentally beneficial use for timber that would otherwise be unsalvageable. Dr Ogden aims to perform a comparison between the quality of wood pellets produced with infested versus non-infested wood, working closely with loblolly pine foresters from Georgia to source trees to use in the experiments.

He is interested in whether the quality of the wood pellets is similar enough to make this a viable alternative use for infested trees. To make a full assessment, Dr Ogden is analysing the chemical composition of the wood, and the density and particles within the pellets to assess their durability, and the cleanliness and efficiency of the wood pellet combustion. In comparison to other combustible fuel crops such as switchgrass, burning wood pellets created from beetle-infested pine trees may still produce less ash greenhouse gases, making it the environmentally superior choice.

To develop a full management plan – from the detection of the beetle attacks to the sale of the final product – Dr Ogden is also assessing the economic viability of processing beetle-infested loblolly pine wood into combustible pellets. This will be a key factor in encouraging foresters to take up the forest management plans he is developing.

Implications and Future Developments

Demonstrating the viability of Dr Ogden’s management plan for southern pine beetle in loblolly pine plantations will be a valuable step towards improving the economic and environmental practices in other similar pest-host forestry scenarios. Pest species of beetles, moths and aphids affect a range of tree species across the globe, with some also making trees more susceptible to secondary infection by fungal and bacterial pathogens. Through early detection with drone technology and a method of salvaging affected wood for use in a saleable product, the forestry industry could avoid significant financial losses and have a positive impact on global greenhouse gas management.

Dr Ogden’s work also extends to other agricultural systems. In particular, his drone technology could be used for identifying areas within crops affected by pests or diseases, allowing for targeted, precise treatment in those areas. This may reduce the overall use of pesticides and herbicides by mitigating the need to spray entire crop fields. He hopes to extend his drone surveillance-technology to other farming systems such as livestock production, by providing precise information about the health and quality of large areas of pasture land. ‘We want to be able to implement several things,’ concludes Dr Ogden, ‘sustainable agricultural practices, precision agricultural practices, and remote sensing.’ 

Reference
https://doi.org/10.33548/SCIENTIA439

Meet the researcher


Dr Cedric A. Ogden

Fort Valley State University
Fort Valley, GA
USA

Dr Cedric Ogden earned his PhD in Agricultural and Biological Engineering from Purdue University, Indiana, USA, for a project researching renewable energy sources and solid fuel handling. Currently, Dr Ogden is an Engineering Technology Assistant Professor and Cooperative Extension Specialist in Renewable Energy at Fort Valley State University. Here, he is developing drone technologies for use in agriculture and forestry monitoring, and management of pests and diseases. In addition to his research, Dr Ogden is passionate about teaching and outreach. Within his projects, he supervises and mentors several student researchers. Dr Ogden also provides external workshops, presentations and consultations on the use of natural resources as renewable energy sources, and liaises with farmers and foresters to further develop his research objectives.

CONTACT

E: ogdenc@fvsu.edu

W: https://www.caes.uga.edu/about/personnel/person.html?pk_id=19784&name=Cedric%20Ogden

FUNDING

USDA-NIFA McIntire Stennis grant

 

Creative Commons Licence
(CC BY 4.0)

This work is licensed under a Creative Commons Attribution 4.0 International License. Creative Commons License

What does this mean?

Share: You can copy and redistribute the material in any medium or format

Adapt: You can change, and build upon the material for any purpose, even commercially.

Credit: You must give appropriate credit, provide a link to the license, and indicate if changes were made.


More articles you may like

Dr Timothy Beers | Mapping the Galaxy’s Stellar Populations Using Large Photometric and Astrometric Surveys

Dr Timothy Beers | Mapping the Galaxy’s Stellar Populations Using Large Photometric and Astrometric Surveys

Astronomers often use spectroscopic (electromagnetic radiation) data and astrometric (motion and positional) data to develop working models describing our Galaxy. Dr Timothy Beers from the University of Notre Dame and his collaborators in Korea and China combined large photometric (visible light) surveys and astrometric data to create multidimensional maps of a large part of the Galaxy. By highlighting significant inhomogeneities in stellar-chemical compositions, motions, and spatial distributions, Dr Beers and his colleagues provide valuable insights into how we can advance our understanding of the formation and evolution of our Galaxy.

Dr Anushia Inthiran | Distance Learning: Impacts for Offshore Students Amid COVID-19

Dr Anushia Inthiran | Distance Learning: Impacts for Offshore Students Amid COVID-19

The COVID-19 pandemic significantly disrupted global education and necessitated a shift to online learning. Due to ongoing border closures, even after the pandemic eased, offshore students were prevented from attending their university in person long after their local peers, impacting their learning ability and future perspectives. Dr Anushia Inthiran from the University of Canterbury conducted a survey among a group of offshore students to understand the consequences of distance learning on their education.

Dr Sébastien Weber | PyMoDAQ: Navigating the Future of Data Acquisition

Dr Sébastien Weber | PyMoDAQ: Navigating the Future of Data Acquisition

In an era where data is paramount, Dr Sébastien Weber and his team at CNRS, the French National Centre for Scientific Research, are changing the landscape for scientists and engineers with PyMoDAQ, an open-source data acquisition software. Their revolutionary tool stands out for its accessibility, versatility, and the thriving community it fosters.

Professor Gary Yohe | Navigating Climate Change: The Impactful Contributions of Gary Yohe

Professor Gary Yohe | Navigating Climate Change: The Impactful Contributions of Gary Yohe

Professor Gary Yohe is a distinguished environmental economist whose work has been pivotal in shaping our understanding of climate change impacts, adaptation strategies, and policy frameworks. His interdisciplinary approach combines economics with environmental science, offering nuanced insights into global warming and its multifaceted impacts on natural and human systems. Professor Yohe equips us with the knowledge and strategies needed to navigate the complex and pressing challenges posed by climate change.